Fluted Vanity Cabinet – Custom Bathroom Vanity Supplier

Fluted vanity cabinet with reeded drawers and quartz top in a modern bathroom

CATEGORY: BATHROOM VANITIES

Features of Fluted Vanity Cabinet

Vertical fluted or reeded door fronts
Moisture-resistant MDF or plywood cores
Lacquer, veneer or wood-grain finishes
Wall-hung or floor-standing designs
Notched drawers around plumbing traps

Boutique hotelsPremium apartmentsShow bathroomsGuest bathrooms

Product Description

Fluted Vanity Cabinet Buying Guide

A fluted vanity cabinet suits boutique hotels, premium apartments and show bathrooms where a textured front adds character without busy patterns. It is not suitable for very wet bathrooms with poor ventilation if finishes are not fully sealed, or for budget projects needing the lowest cleaning effort, since grooves collect dust and soap residue. Before ordering, confirm flute profile and spacing, finish, basin and tap model, plumbing positions, wall construction for wall-hung units and top material.

Arcova machines fluted fronts on CNC lines for consistent groove spacing, seals all edges before finishing and approves finish samples before mass production. Each fluted vanity cabinet is labelled by bathroom and packed for export.

Made to your drawings and site measurements
ISO9001, BSCI and FSC certified factory
Export packing labelled by unit and room
24-hour online technical support

Quote for Fluted Vanity Cabinet

Send sizes, quantity and destination — reply within 24 hours.

Specifications

Fluted Vanity Cabinet Specifications

Item	Specification
Front	Fluted or reeded MDF or veneer
Core	Moisture-resistant MDF or plywood
Finish	PU lacquer, veneer or wood-grain
Mounting	Wall-hung or floor-standing
Top	Stone, quartz, ceramic or solid surface
Hardware	Blum, Hettich, DTC by budget
Flute profile	confirmed per sample
Certifications	ISO9001; emission test reports on request

Option	Detail
Width	Single or double basin widths
Groove	Narrow or wide flute spacing
Handle	Integrated pull or metal handle
Interior	U-shaped drawers, organizers
Mirror	Matching fluted mirror cabinet

Final values are confirmed on approved shop drawings.

Production line at Arcova Contract Manufacturing Base

Factory Direct

Produced at Arcova Contract Manufacturing Base

Every fluted vanity cabinet order is produced on our 40,000 m² site with 12 production lines, including automated CNC cutting, edge banding and drilling. Monthly capacity of 40 × 40HQ containers lets us run sample, mock-up and phased project shipments from one factory.

Factory Strength

FAQ

Fluted Vanity Cabinet FAQs

Are fluted fronts hard to clean?

They need slightly more care than flat fronts because dust and splashes settle in the grooves. A satin lacquer with a smooth sealed groove helps, and wider flutes are easier to wipe than very narrow ones. For hotels, housekeeping should use a soft brush or microfiber cloth during routine cleaning.

Can fluting be made in veneer or only paint?

Both are possible. Painted fluting gives crisp, even lines in any color. Veneer fluting shows natural grain along the grooves but requires careful machining and sealing. Wood-grain foil or laminate fluting is also an option for tighter budgets. Ask for physical samples of each. Matching mirror cabinets can share the same flute profile.

How do drawers work around the sink trap?

The top drawer is usually U-shaped to wrap around the trap, while lower drawers run full width if the waste exits through the wall. Send the basin and trap model and the waste height so we can check drawer clearances on the shop drawings. Wall-exit waste gives the most drawer space.

What wall is needed for a wall-hung vanity?

Wall-hung units need solid masonry or reinforced stud walls, because the vanity, top, basin and user leaning on it create a significant load. Concealed brackets or a steel frame may be used. The site engineer should confirm the fixing method before tiling. Fixing points are marked on our drawings for installers.