Corner Bathroom Vanity – Custom Vanity Manufacturer for Projects

Wall-hung corner bathroom vanity with integrated basin in a small bathroom

CATEGORY: BATHROOM VANITIES

Features of Corner Bathroom Vanity

Triangular, quarter-round or L-shaped bodies
Moisture-resistant boards with sealed edges
Ceramic, stone or solid-surface basin tops
Floor-standing or wall-hung versions
Plumbing cut-outs planned on drawings

Powder roomsSmall apartment bathroomsStudent housingHotel bathrooms

Product Description

Corner Bathroom Vanity Buying Guide

A corner bathroom vanity suits small bathrooms, powder rooms and hotel or student bathrooms where a straight vanity would block the door or shower. It is not ideal when users need generous counter space, or when plumbing sits on a wall that cannot be routed into the corner. Before ordering, confirm both wall lengths and the corner angle, water supply and drain positions, basin type, mounting height and whether the walls are tiled before installation.

Arcova builds each corner bathroom vanity from moisture-resistant boards with sealed edges, checks basin fit against the cabinet in the factory and approves finishes with samples before production. Units are packed and labelled by bathroom for project installation.

Made to your drawings and site measurements
ISO9001, BSCI and FSC certified factory
Export packing labelled by unit and room
24-hour online technical support

Quote for Corner Bathroom Vanity

Send sizes, quantity and destination — reply within 24 hours.

Specifications

Corner Bathroom Vanity Specifications

Item	Specification
Shape	Triangular, quarter-round or L-shaped
Carcass	Moisture-resistant board or plywood
Fronts	Melamine, lacquer, veneer or PET
Top	Ceramic, quartz, stone or solid surface
Mounting	Floor-standing or wall-hung
Hardware	Soft-close hinges, brand by budget
Corner angle	Built to measured site angle
Exact sizes	confirmed per drawing

Option	Detail
Basin	Integrated or vessel basin
Storage	Door, open shelf or drawer
Plinth	Raised legs or recessed toe kick
Mirror	Corner mirror or mirror cabinet
Finish	Matched to bathroom joinery

Final values are confirmed on approved shop drawings.

Production line at Arcova Contract Manufacturing Base

Factory Direct

Produced at Arcova Contract Manufacturing Base

Every corner bathroom vanity order is produced on our 40,000 m² site with 12 production lines, including automated CNC cutting, edge banding and drilling. Monthly capacity of 40 × 40HQ containers lets us run sample, mock-up and phased project shipments from one factory.

Factory Strength

FAQ

Corner Bathroom Vanity FAQs

Can corner vanities fit walls that are not exactly 90 degrees?

Yes. Many bathroom corners are slightly out of square after tiling. We can build to a measured angle or add scribe edges so the unit sits tight to both walls. Measure after tiling where possible, and send both wall lengths and the angle for the drawings.

How is the vanity protected from water?

We use moisture-resistant boards, seal exposed edges and keep the base raised or wall-hung so floor water does not soak into the cabinet. Plumbing openings are cut and sealed in the factory where possible. Good bathroom ventilation and prompt wiping of standing water still matter for long service life.

Which basin works best in a corner?

Compact integrated tops make cleaning easier and give a seamless edge. Vessel basins need enough counter depth around them. For very small corners, a rounded front reduces knee and hip contact. Send the tap model too, since tap reach must clear the basin correctly.

Is a wall-hung corner vanity strong enough?

Wall-hung units need solid walls or reinforced studs with concealed brackets. Stone tops add significant weight, so fixing must be planned. We mark bracket positions on drawings, and your contractor should confirm wall strength before tiling closes the walls.