Invisible Flush Wall Door – Concealed Door Manufacturer for Projects

Invisible flush wall door with concealed hinges set into a painted feature wall

CATEGORY: INTERIOR DOORS

Features of Invisible Flush Wall Door

Door leaf sits flush with finished wall
Hidden aluminum or timber frame option
Concealed 3D-adjustable hinges
Paint-ready, veneer or joinery-matched face
Magnetic lock for a clean edge

Hotel suite corridorsVilla feature wallsOffice meeting roomsWalk-in wardrobe entries

Product Description

Invisible Flush Wall Door Buying Guide

An invisible flush door suits hotel suites, villas and offices where a door should disappear into a painted feature wall or built-in joinery. It is not ideal where heavy daily traffic or certified fire and acoustic performance are required, unless a matching certified system is specified. Before ordering, confirm the wall thickness, finished wall build-up, opening direction, required clear width, and which trade finishes the door face on site.

Arcova supplies each Invisible Flush Wall Door as a complete set with concealed frame, leaf and hardware, pre-machined on CNC lines so hinge and lock positions are consistent across every unit. Shop drawings show the wall interface, and a mock-up door can be built before mass production.

Made to your drawings and site measurements
ISO9001, BSCI and FSC certified factory
Export packing labelled by unit and room
24-hour online technical support

Quote for Invisible Flush Wall Door

Send sizes, quantity and destination — reply within 24 hours.

Specifications

Invisible Flush Wall Door Specifications

Item	Specification
Door core	Engineered timber or honeycomb, project-specific
Frame	Concealed aluminum or timber frame
Hinges	Concealed 3D-adjustable hinges
Lock	Magnetic lock, privacy or key option
Face finish	Primed for paint, veneer or laminate
Opening	Push or pull side, left or right hand
Leaf thickness	confirmed at quotation
Max. leaf height	confirmed at quotation

Option	Detail
Height	Floor-to-ceiling or standard height leaves
Face	Matched to adjacent wardrobe or cabinetry finish
Skirting	Recessed skirting detail aligned across the door
Swing	Inward or outward opening, left or right
Hardware level	Hinge and lock brand chosen by budget

Final values are confirmed on approved shop drawings.

Production line at Arcova Contract Manufacturing Base

Factory Direct

Produced at Arcova Contract Manufacturing Base

Every invisible flush wall door order is produced on our 40,000 m² site with 12 production lines, including automated CNC cutting, edge banding and drilling. Monthly capacity of 40 × 40HQ containers lets us run sample, mock-up and phased project shipments from one factory.

Factory Strength

FAQ

Invisible Flush Wall Door FAQs

Can the door be painted on site with the wall?

Yes. We can supply the leaf and frame primed so your painter finishes it together with the wall for a continuous look. If you prefer factory finishing, we match veneer or laminate to the adjacent wardrobes or cabinetry instead. Tell us which trade handles the final finish.

Which wall types work with a concealed frame?

Frames are typically installed into drywall or masonry openings before the final wall finish. The frame depth must suit your wall thickness, so we need the full wall build-up from your architect. We will show the interface on shop drawings for approval.

Will it still look flush on the hinge side?

A concealed door is truly flush on one side only, usually the push side. The other side shows a small reveal around the leaf. Decide which room needs the invisible look before ordering, because this sets the opening direction. The hinge-side reveal stays small and even when the frame is installed plumb.

Is a mock-up recommended?

For hotel and residential projects with many identical doors, we recommend one mock-up door set. It lets your team check alignment, the hinge gap and finish against the wall before mass production, which avoids costly corrections later. It also confirms the agreed door weight suits the concealed hinges.